Passleader 70-336 Study Materials Covers All Knowledge Points Of Real Exam Ensure 100 Percent Pass (1-20)

QUESTION 1
You have a Lync Server 2013 infrastructure that contains an Enterprise Edition front end pool. You plan to add the following server roles to the existing infrastructure:
* Edge Server
* Archiving Server
* Monitoring Server
* Persistent Chat Server
You need to identify the minimum number of Microsoft SQL Server servers that must be added to the existing Lync Server 2013 infrastructure. The solution must not use the existing SQL Server Back End Server. What is the minimum number of SQL Server servers that you should identify?

A.    1
B.    2
C.    3
D.    4

Answer: A

QUESTION 2
Your company has a main office and a branch office. The main office is located in Amsterdam. The branch office is located in New York. Each office has a data center. The offices connect to each other by using a high-bandwidth, low-latency WAN link. You have a Lync Server 2013 infrastructure that contains 5,000 users. You plan to deploy a persistent chat infrastructure. You need to ensure that persistent chat rooms remain available if a Persistent Chat Server fails. What should you do?

A.    Create one Persistent Chat Server pool that contains two active chat servers.
B.    Create two Persistent Chat Server pools that each contains one active chat server and one standby chat server.
C.    Create two Persistent Chat Server pools that each contains one active chat server.
D.    Create one Persistent Chat Server pool that contains one active chat server and one standby chat server.

Answer: A

QUESTION 3
Hotspot Question
You plan to deploy a Lync Server 2013 infrastructure that will contain the components shown in the following table.
312
The fully qualified domain name (FQDN) of the Enterprise Edition pool will be Iyncpool01.contoso.com. Lync web services will be accessed at a URL of https://lyncweb01.contoso.com. You plan to use DNS load balancing for the Enterprise Edition pool. You need to identify which host (A) records must be created on the internal DNS servers to support the planned Lync Server 2013 deployment. Which A record entries should you identify? To answer, select the appropriate records in the answer area.
323

Answer:
333

QUESTION 4
You plan to deploy Lync Server 2013. Your company uses only certificates that are purchased from a third-party certification authority (CA). The company uses the following domain names to generate email addresses for users:
•    Adatum.com
•    Contoso.com
•    Fabrikam.com
•    Wingtiptoys.com
You plan to configure simple URLs for the planned deployment. You need to recommend which meeting URLs to use. The solution must minimize the cost of purchasing certificates. Which names should you include in the recommendation?

A.    https://meet.contoso.com
https://meet.adatum.com
https://meet.wingtiptoys.com
https://meet.fabrikam.com
B.    https://meet.contoso.com
https://meet.contoso.com/adatum.com
https://meet.contoso.com/fabrikam.com
https://meet.contoso.com/wingtiptoys.com
C.    https://meet.contoso.com/contoso.com
https://meet.contoso.com/*.com
D.    https://meet.contoso.com/contoso.com
https://meet.contoso.com/adatum.com
https://meet.contoso.com/fabrikam.com
https://meet.contoso.com/wingtiptoys.com

Answer: D

QUESTION 5
Drag and Drop Question
You have a Lync Server 2013 infrastructure. You plan to provide remote users with the ability to establish the following:
•    Peer-to-peer calls between themselves and users on the internal network
•    Chat sessions from mobile devices
You need to recommend which components must be configured to provide the required access to the remote users. Which components should you recommend? To answer, drag the appropriate component to the correct requirement in the answer area. Each component may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
513

Answer:
524

QUESTION 6
Drag and Drop Question
You deploy a Lync Server 2013 infrastructure that contains an Edge Server named Serverl. Serverl is configured as shown in the following table.
612
You plan to configure federation with your company’s external partners. You need to identify which ports must be allowed on the firewall to provide the instant messaging (IM), presence, and web conferencing features. Which ports should you identify? To answer, drag the appropriate ports to the correct location in the answer area. Each port may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
624

Answer:
635

QUESTION 7
You plan to deploy a Lync Server 2013 infrastructure. You plan to use a Microsoft SQL Server database mirror that has a witness. A database administrator gives you a list of five servers that you can use for the deployment. The servers are configured as shown in the following table.
714
You need to identify which servers you must use for the SQL Server backend. Which servers should you identify?

A.    SQL2 and SQL3 for the mirror
SQL5 for the witness
B.    SQL1 and SQL4 for the mirror
SQL5 for the witness
C.    SQL2 and SQL3 for the mirror
SQL4 for the witness
D.    SQL1 and SQL4 for the mirror
SQL2 for the witness

Answer: A

QUESTION 8
You are planning a Lync Server 2013 deployment. You need to recommend which Lync Server 2013 components are required to meet the following requirements:
– Presence, chat, and multiparty video conferencing features must be provided.
– Quality of Experience (QoE) data and call detail recording (CDR) must be provided.
– Lync Server services must be provided to internal users only.
– Licensing costs must be minimized.
Which two components should you recommend? (Each correct answer presents part of the solution. Choose two.)

A.    A Director pool
B.    A Standard Edition server
C.    An Enterprise Edition pool
D.    An Edge pool
E.    A Microsoft SQL Server database

Answer: BE


PassLeader5

http://www.passleader.com/70-336.html

QUESTION 9
Drag and Drop Question
Your company has several offices. The offices are located in one office building. The building is located in Seattle. The company has employees from Europe and North America. The company has a phone at a security desk. You implement Lync Server 2013 Enterprise Voice. You need to implement call routing for emergency calls. The solution must meet the following requirements:
– If a user dials 112, the call must be routed to a phone extension of 0911.
– If a user dials 0911, the call must be routed to the phone at the security desk.
– The phone at the security desk must be used to forward calls to the emergency number in the Seattle offices only.
What should you use?
To answer, drag the appropriate technology to the correct requirement in the answer area. Each technology may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
913

Answer:
924

QUESTION 10
Drag and Drop Question
You have a Microsoft Office Communications Server 2007 R2 infrastructure that contains two servers. The servers are configured as shown in the following table.
1015
You plan to deploy Lync Server 2013. You need to implement a pilot deployment of Lync Server 2013 for internal users. You install a new server named Server3. Which four actions should you perform next? To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.
1024

Answer:
1033

QUESTION 11
Drag and Drop Question
You have a Lync Server 2013 infrastructure that contains two servers. The servers are configured as shown in the following table.
1115
You deploy two new servers. The servers are configured as shown in the following table.
1124
You need to recommend changes to the infrastructure to meet the following requirements:
– Ensure that remote users can connect to the network by using Microsoft Lync 2013.
– Ensure that Server3 authenticates the remote users before the users connect to a Front End Server.
Which Lync Server 2013 server role should you recommend deploying to each server? To answer, drag the appropriate server role to the correct server in the answer area. Each server role may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
1134

Answer:
1144

QUESTION 12
You have a Lync Server 2010 infrastructure. You plan to migrate to Lync Server 2013. You have four client computers. The client computers are configured as shown in the following table.
1212
You need to identify which client computer types can use audio conferencing hosted on Lync Server 2013 without installing any additional software on the client computers. Which client computer types should you identify? (Each correct answer presents part of the solution. Choose all that apply.)

A.    A
B.    B
C.    C
D.    D

Answer: BCD

QUESTION 13
Drag and Drop Question
You have a Lync Server 2013 infrastructure. You need to configure Lync Server 2013 to meet the following conferencing requirements:
– Ensure that a legal disclaimer is added to all meeting invitations.
– Ensure that only Microsoft Lync 2013 clients can be used to join conferences.
– Ensure that meeting organizers manually admit remote meeting attendees who are users in your company.
Which cmdlets should you run? To answer, drag the appropriate cmdlet to the correct requirement in the answer area. Each cmdlet may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
1314

Answer:
1324

QUESTION 14
You have a Lync Server 2013 infrastructure. Your company has a sales department and a research department. You deploy persistent chat. You need to configure persistent chat to meet the following requirements:
– Users in the sales department must be prevented from viewing the names of the rooms used by the research department.
– Users in the research department must be able to discover all of the rooms used by their department.
What should you do?

A.    Create a user-level Persistent Chat Policy named Sales.
Apply the Sales policy to the sales and research users.
Create persistent chat rooms for each department and set the privacy to Secret.
B.    Create a category named ResearchRooms.
Add the research users as Allowed members to the ResearchRooms category.
Add the sales users as Denied members to the ResearchRooms category.
Create persistent chat rooms for each department and set the privacy to Closed.
C.    Create a category named ResearchRooms.
Add the research users as Allowed members to the ResearchRooms category.
Add the sales users as Denied members to the ResearchRooms category.
Create persistent chat rooms for each department and set the privacy to Secret.
D.    Create a user-level Persistent Chat Policy named Sales.
Apply the Sales policy to the sales and research users.
Create persistent chat rooms for each department and set the privacy to Open.

Answer: C

QUESTION 15
Drag and Drop Question
Your network contains the servers that are configured as shown in the following table.
1514
You move all users to Lync Server 2013. You need to decommission Office Communications Server 2007 R2. Which four actions should you perform?
To answer, move the four appropriate actions from the list of actions in the answer area and arrange them in the correct order.
1523

Answer:
1536

QUESTION 16
Your company has a main office and a branch office. The main office has 3,000 users. The branch office has 100 users. The offices are connected via a WAN link. You have a Lync Server 2013 infrastructure. The main office has a pool named Pool1 that contains two Enterprise Edition Front End Servers. The branch office only contains an Active Directory domain controller and a file server. You need to recommend a high-availability solution to ensure that users can establish calls if one of the following components fails:
•    A Front End Server
•    A PSTN gateway
•    A WAN router
The solution must minimize deployment and maintenance costs. What should you recommend?

A.    In the branch office, deploy a second Enterprise Edition pool named Pool2.
Configure Pool1 to use Pool2 as a backup pool.
Configure one trunk in Pool1.
Configure one trunk in Pool2.
B.    In the branch office, deploy an SBA named SBA1.
Configure SBA1 to use Pool1 as a backup registrar.
Configure two trunks in Pool1.
Configure one trunk in SBA1.
C.    In the main office, deploy a second Enterprise Edition pool named Pool2.
In the branch office, deploy an SBA named SBA1.
Configure SBA1 to use Pool2 as a backup registrar.
Configure two trunks in Pool1.
Configure two trunks in SBA1.
D.    In the branch office, deploy a second Enterprise Edition pool named Pool2.
Configure Pool1 to use Pool2 as a backup pool.
Configure two trunks in Pool1.
Configure two trunks in Pool2.

Answer: B


PassLeader12

http://www.passleader.com/70-336.html

QUESTION 17
You deploy a Lync Server 2013 infrastructure that contains four servers. The servers are configured as shown in the following table.
1714
You need to deploy a Persistent Chat pool. The solution must use the least amount of servers. On which server should you install the Persistent Chat Server role?

A.    Lync1
B.    Lync2
C.    Lync3
D.    Lync4
E.    A new server

Answer: B

QUESTION 18
You have a Lync Server 2013 infrastructure that contains four servers. The servers are configured as shown in the following table.
1812
You run the Get-CsManagementStoreReplicationStatus cmdlet and discover the following replication issue:
1824
From Telnet, you verify that you can connect to Lync3 over TCP ports 443, 4443, 5061, and 5062. You republish the topology successfully and you restart Lync3. You need to identify what is causing the replication issue. What should you identify?

A.    A firewall issue
B.    A failed service
C.    A share permission issue
D.    A certificate issue
E.    A routing issue

Answer: D

QUESTION 19
You have two servers named Lync1 and Lync2 that have Lync Server 2013 Standard Edition deployed. The servers are located in different buildings. Lync1 hosts response groups. You need to ensure that Lync2 can host the response groups if Lync1 fails. Which cmdlet should you run first?

A.    Export-CsConfiguration
B.    Export-CsRgsConfiguration
C.    Backup-CsPool
D.    Move-CsRgsConfiguration

Answer: B

QUESTION 20
Drag and Drop Question
You have a Lync Server 2013 infrastructure. You need to recommend which tools must be used to gather information to troubleshoot issues related to the following:
– Routing calls between internal users
– Routing outbound calls handled by Lync Server 2013
Which tool should you recommend? To answer, drag the appropriate tool to the correct location in the answer area. Each tool may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
2013

Answer:
2025


Passleader 70-336 Study Materials Covers All Knowledge Points Of Real Exam Ensure 100 Percent Pass

http://www.passleader.com/70-336.html